XF Series Fluidizing Dryer
Product introduction:
XF series horizontal boiling dryer is also called fluidized bed or fluidized bed. Due to the different nature of dry materials, dust removal equipment supporting, according to the need to consider, can be selected at the same time cyclone separator, cloth bag dust remover, can also choose one of the -. - generally speaking, the proportion is lowerFor large granule and granule materials, only cyclone separator is needed. Small particle and powder materials with light weight should be equipped with bag dust remover, pneumatic feeding device and belt conveyor for selection. Steam, electricity, hot air furnace can be used (according to customer requirements).Granular solid materials are added into the fluidized bed dryer by the feeder, and the clean hot air is distributed into the bed body by the valve plate. The wet materials from the feeder are heated by the hot air to form a boiling state. Because of the extensive contact between hot air and materials, the heat and mass transfer process is enhanced, so it can be dried in a relatively short time. The material enters from one end of the bed body and is discharged from the discharge port after boiling and drying for several seconds to several minutes.The waste gas is discharged from the top of the effervescent bed and discharged after the solid powder is recovered by the cyclone dust collector group and the bag dust collector.Steam, electricity, hot air furnace can be used (according to customer requirements).
Principle:
The clean hot air is distributed through the valve plate into the bed body, and the wet material from the feeder is heated by the hot air to form a boiling state. Because of the extensive contact between hot air and materials, the heat and mass transfer process is enhanced, so it can be dried in a relatively short time. If continuous type is used, the material enters from one end of the bed body and flows out from the other end automatically after boiling and drying for several seconds to several minutes. The equipment is generally operated under negative pressure.
Application: Drying operations of pharmaceuticals, chemical raw materials, foodstuffs, grain processing and feedstuffs. For example: drying and dehumidifying of bulk drug, tablet granule, Chinese medicine granule, health food, beverage granule, corn germ, feed, plastic resin, citric acid and other powdery material.
Technical characters:This fluidized bed dryer can achieve automation and continuous drying process.It has a high drying speed and a low temperature and the product quality can beensured, meeting GMP requirements. The heating resource can be steam,electricity or furmace.
Main Technical Parameter:
| model and specifications/technical parameters | XF0.4-8 | XF0.4-10 | XF0.4-12 | XF0.5-4(XF50) | XF0.5-6 | XF0.5-8 |
| area of bed layer (m2) | 3.2 | 4 | 4.8 | 2 | 3 | 4 |
| drying capacity (kg H₂O/h) | 112~ 16 | 140~200 | 168~240 | 70~100 | 105~150 | 140~200 |
| Power of fan (kw) | 48 | 70 | 15 | 30 | 48 | 70 |
| temperature of air in (C) | 120~140 | 120~140 | 120~140 | 120~140 | 120~ 140 | 120~140 |
| temperature of in material (C) | 40~ 60 | 40~60 | 40~60 | 40~60 | 40~60 | 40~60 |
| overall dimensions (main machine)(m) | 8x1x3.58 | 8x1x3.58 | 12x1x3.85 | 4x1.2x4.1 | 6x1.2x4.1 | 8x1.2x4.1 |
| occupied area (㎡) | 74 | 82 | 96 | 50 | 70 | 82 |
| model and specifications/technical parameters | XF0.5-10 | XF0.5-12 | XF0.5-14 | XF0.5-16 | XF0.5-18 |
| area of bed layer (m2) | 5 | 6 | 37 | 8 | 9 |
| drying capacity (kg H₂O/h) | 175~250 | 210~300 | 245~350 | 280~400 | 315~450 |
| Power of fan (kw) | 105 | 140 | 147 | 169 | 197 |
| temperature of air in (C) | 120~ 140 | 120~ 140 | 120~ 140 | 120~140 | 120~140 |
| temperature of in material (C) | 40~60 | 40~60 | 40~60 | 40~60 | 40~60 |
| overall dimensions (main machine)(m) | 10x1.2x4.1 | 12x1.2x4.1 | 14x1.2x4.1 | 16x1.2x4.1 | 18x1.2x4.1 |
| occupied area (㎡) | 100 | 140 | 180 | 225 | 268 |
| model and specifications/technical parameters | XF0.4-8 | XF0.4-10 | XF0.4-12 | XF0.5-4(XF50) | XF0.5-6 | XF0.5-8 |
| area of bed layer (m2) | 3.2 | 4 | 4.8 | 2 | 3 | 4 |
| drying capacity (kg H₂O/h) | 112~ 16 | 140~200 | 168~240 | 70~100 | 105~150 | 140~200 |
| Power of fan (kw) | 48 | 70 | 15 | 30 | 48 | 70 |
| temperature of air in (C) | 120~140 | 120~140 | 120~140 | 120~140 | 120~ 140 | 120~140 |
| temperature of in material (C) | 40~ 60 | 40~60 | 40~60 | 40~60 | 40~60 | 40~60 |
| overall dimensions (main machine)(m) | 8x1x3.58 | 8x1x3.58 | 12x1x3.85 | 4x1.2x4.1 | 6x1.2x4.1 | 8x1.2x4.1 |
| occupied area (㎡) | 74 | 82 | 96 | 50 | 70 | 82 |
| model and specifications/technical parameters | XF0.5-10 | XF0.5-12 | XF0.5-14 | XF0.5-16 | XF0.5-18 |
| area of bed layer (m2) | 5 | 6 | 37 | 8 | 9 |
| drying capacity (kg H₂O/h) | 175~250 | 210~300 | 245~350 | 280~400 | 315~450 |
| Power of fan (kw) | 105 | 140 | 147 | 169 | 197 |
| temperature of air in (C) | 120~ 140 | 120~ 140 | 120~ 140 | 120~140 | 120~140 |
| temperature of in material (C) | 40~60 | 40~60 | 40~60 | 40~60 | 40~60 |
| overall dimensions (main machine)(m) | 10x1.2x4.1 | 12x1.2x4.1 | 14x1.2x4.1 | 16x1.2x4.1 | 18x1.2x4.1 |
| occupied area (㎡) | 100 | 140 | 180 | 225 | 268 |
Schematic of installation:
