
Add to Cart
V type shape powder flour granule liquid wet dry particle mixer blending for breadfruit and plantain powder
Introduction:
The V type cone mixer adopts manual feed and closed disc valve discharge, which can avoid dust spilling; with unique mixing barrel structure, high efficiency blending, and no dead angle,the materials can mix evenly. The inside and outside of machine are polished.It is suitable for smaller powder, blocks and the material that contain a certain mixture of water. In addition, the machine is also equipped with a timing device; In that case, you can control the material mixing time.
Application:
The V type mixer blender is widely used for blending more than two materials(powder or granule shape)in pharmaceutical industry, chemical industry, foodstuff industry and so on.It is suitable for mix powder, granule material with good liquidity, small property difference. Because of the material in the v-shaped mixed container can flow smoothly, it will not destroy the base material, so the v-shaped mixer applies to easy to broken, easy wear granular materials,fine powder,and block materials with certain moisture content
V cone mixer blender applied fields
The V type mixer blender is widely used for blending more than two materials(powder or granule shape)in pharmaceutical industry, chemical industry, foodstuff industry and so on.It is suitable for mix powder, granule material with good liquidity, small property difference. Because of the material in the v-shaped mixed container can flow smoothly, it will not destroy the base material, so the v-shaped mixer applies to easy to broken, easy wear granular materials,fine powder,and block materials with certain moisture content.
Technical characters:
Main Technical Parameter:
Model | VHJ-0.18 | VHJ-0.3 | VHJ-0.5 | VHJ-1.0 | VHJ-1.5 | VHJ-2.0 | VHJ-2.5 | VHJ-3.0 | VHJ-4.0 | VHJ-5.0 | VHJ-6.0 |
Productive capacity(kg/time) | 72 | 120 | 200 | 400 | 600 | 80 | 1000 | 1200 | 1600 | 2000 | 2400 |
Model of vacuum pump | W2 | W2 | W2 | W3 | W3 | W3 | W3 | W4 | W4 | W4 | W4 |
Time of raw material fed in(min) | 3-5 | 3-5 | 4-6 | 6-9 | 6-10 | 8-13 | 8-15 | 8-12 | 10-15 | 15-20 | 18-25 |
Mixing time(min) | 4-8 | 6-10 | 6-10 | 6-10 | 6-10 | 6-10 | 6-10 | 8-12 | 8-12 | 8-12 | 8-12 |
Total volume(m3) | 0.18 | 0.3 | 0.5 | 1.0 | 1.5 | 2.0 | 2.5 | 3.0 | 4.0 | 5.0 | 6.0 |
Stirring speed(r/min) | 12 | 12 | 12 | 12 | 12 | 12 | 12 | 10 | 10 | 10 | 10 |
Motor power(kw) | 1.1 | 1.1 | 2.2 | 4 | 4 | 5 | 7.5 | 7.5 | 11 | 15 | 18.5 |
Rotation height(mm) | 1580 | 1760 | 2400 | 2840 | 3010 | 3240 | 3680 | 3700 | 4350 | 4800 | 5300 |
Weight (kg) | 280 | 320 | 550 | 950 | 1020 | 1600 | 2040 | 2300 | 2800 | 3250 | 3850 |